LightLOC Express 2 is a cost effective fiber optic intrusion detection device in the LightLOC family of products. It is a zone based, modular system capable of monitoring any of the LightLOC sensing devices, including manholes, grates and switches. It is ideal for single alarm point monitoring.
Express 2 operates by monitoring the power level of optical energy being transmitting and received through the zone. It is an adaptable device which learns the secure state of its zone and immediately detects an event exceeding the unit’s threshold. Additionally, Express 2 can differentiate between a sensor breach and a fiber break and is rated for indoor or outdoor use. Automatic baselining allows the device to adjust to environmental factors and still immediately detect an event exceeding the unit’s alarm threshold.
Relay outputs are provided on a front terminal block, plus indicator LEDs at the front of the module. Four (4) normally open and normally closed contacts provide communication between Express and an existing site security system. Relays include one each for a Momentary Breach Alarm, Momentary Break Alarm, Latched Breach Alarm, and Latched Break Alarm.
In addition to relays, a front terminal block also provides access for a remote control module. This includes the abilities to test the module remotely, set the secure state of the system, and acknowledge an alarm. Local control switches are available on the front of the module.