Express System Monitoring 2017-12-13T09:49:09+00:00

Express Monitoring
LightLOC Express is a cost-effective fiber-optic intrusion detection device in the LightLOC family of products. It is a zoned-based, modular version of the LightLOC Network System and is capable of monitoring any of the LightLOC sensing devices over miles of fiber including manholes, grates, gates, detection cable and denial cable. It is ideal for discrete points, small systems, and zones.

Express operates by monitoring the power level of optical energy being transmitted and received through a zone. It is an adaptable device which learns the secure state of its zone and immediately detects an event exceeding the unit’s threshold. Additionally, Express can differentiate between a sensor breach and a fiber break and is rated for indoor or outdoor use.

As outputs from the device, relays are provided on a rear terminal block in addition to indicator LEDs at the front of the module. Four (4) normally open and normally closed contacts provide communication between Express and an existing site security system. Relays include one each for a Momentary Breach Alarm, Momentary Break Alarm, Latched Breach Alarm, and Latched Break Alarm.

In addition to providing relays, the rear terminal block provides access for remote module control. This includes the abilities to test the module remotely, set the secure state of the system, and acknowledge an alarm. Local control switches are available on the front of the module.


  • Cost-Effective Fiber Optic Intrusion Detection System
  • Extremely Low False Alarm Rates
  • Long-Distance Monitoring to 25km
  • Low Power: 5VDC,
  • -40C to 65C Operating Temperature Range
  • 1550nm and 1310nm Laser Available: -5dBm Typical, 0dBm Maximum Output Per Port
  • Instant Alarm Detection
  • Compatible with Standard Alarm Panels
  • Early Detection Breach Alarm
  • Momentary and Latched Relay Outputs for Breach and Break Alarms
  • Self-Test Diagnostics Performance Validation
  • Remote Acknowledgeable
  • Optimized for Use With the LightLOC Fiber Sensors
  • Stand-Alone or Rack-Mountable in 2U Chassis

Data Sheet:

Express Spec Sheet